- Joined
- Oct 3, 1998
- Messages
- 3,264
<A HREF="http://www.chaicutlery.com/DeltaZ/dz6111bb-6113hc.jpg" TARGET=_blank>
</A>
Useful pattern. 3 1/2" or so of 440A. Good ball-bearing detents, lockups seems solid, on the near side of the tang (didn't try a spine-whack yet). Open construction with steel posts instead of a spacer along the spine. The edge touches the rear spacer about 1/3" from the point leaving a little rough spot that doesn't affect normal cutting work, but might make a chicken you slaughtered with it non-kosher.
No clips - these pocket knives go down inside your pocket.
------------------
- JKM
www.chaicutlery.com
AKTI Member # SA00001
Useful pattern. 3 1/2" or so of 440A. Good ball-bearing detents, lockups seems solid, on the near side of the tang (didn't try a spine-whack yet). Open construction with steel posts instead of a spacer along the spine. The edge touches the rear spacer about 1/3" from the point leaving a little rough spot that doesn't affect normal cutting work, but might make a chicken you slaughtered with it non-kosher.
No clips - these pocket knives go down inside your pocket.
------------------
- JKM
www.chaicutlery.com
AKTI Member # SA00001